Drawings
Interior Detail Package
Kitchen, bath, stair, and millwork elevations built to pass interior plan check.
Drawings
Interior drawings built for permit approval.
Interior Detail Packages provide the room-level drawing documentation that building departments and inspectors require for kitchen remodels, bathroom renovations, stair replacements, and custom millwork scopes. We produce complete interior elevation sets, cabinet layout drawings, stair section details, shower waterproofing details, and millwork dimension schedules. Every sheet is drawn to the standard required by the applicable jurisdiction, so the package moves through plan check without corrections.
Kitchen Elevation — Sheet A4.1
Scale 1:50 · NTS
Why This Matters
The plan checker assigned to a kitchen or bathroom remodel is looking at three things: the waterproofing details, the cabinet heights, and the ventilation. If any one of those is missing or unclear, the package comes back as a correction. Interior detail drawings that address exactly what the plan checker needs to see are the only way to move a remodel permit through on the first review. Generic floor plans are not enough.
Common corrections we prevent
- Missing waterproofing details on shower pans and wet wall assemblies
- Unlabeled cabinet heights triggering ADA review on commercial kitchens
- Missing handrail profile and dimensions for stair permit drawings
- No fire blocking shown at stair soffit and adjacent wall cavities
- Structural header not shown or sized at window openings in bearing walls
Deliverables
Detail types covered.
Interior Elevations
Dimensioned elevation drawings for all rooms in scope, showing cabinet layout, tile extents, appliance locations, and opening dimensions.
Cabinet Layout and Schedule
Plan view and elevation of cabinet configurations with heights, depths, door swing directions, and hardware callouts where required.
Stair Section and Details
Vertical section through the stair showing rise, run, handrail height, profile, and guardrail conditions. Code compliance notes included.
Shower and Wet Area Details
Waterproofing membrane assembly details for shower pans and wet walls, including membrane type, termination, and curb conditions.
Millwork Dimensions
Dimension schedule for custom millwork elements showing finished heights, depths, setbacks, and clearances from adjacent walls and fixtures.
Compliance Notes
Jurisdiction-specific notes covering accessibility requirements, fire blocking locations, ventilation provisions, and any applicable code sections.
How We Work
Scope Confirmation
We confirm the rooms, fixture types, cabinet configurations, and stair conditions in scope. Any field measurement data, photos, or existing drawings you have are incorporated at intake.
Elevation Drawing
Each room is drawn in elevation at the required scale. Upper and lower cabinet heights are dimensioned. Appliance locations, outlets, and tile extents are shown. Window and door openings are referenced.
Detail Drawing
Where required by the jurisdiction or by the scope, we produce detail drawings: shower pan assembly, stair section with handrail profile, window sill flashing at wet walls, and fire blocking at stair soffits.
Coordination and Notes
All drawings are coordinated against the floor plan and against each other. Jurisdiction-specific notes are added: waterproofing membrane callouts, blocking requirements, ADA notes where applicable.
Package Assembly
All sheets are numbered, indexed, and compiled into a PDF package formatted for the building department's submission requirements.
Designed For
Built for these projects.
Remodel Contractors
Need interior elevation drawings and detail sheets before pulling a kitchen, bath, or stair remodel permit.
Property Owners
Undertaking high-end kitchen or bath renovations that require interior permit documentation for the building department.
Interior Designers
Specifying custom cabinetry and millwork and needing permit-ready drawings that coordinate design intent with code compliance.
Architects on Production Support
Handling design and needing a drafting partner to produce interior elevation and detail packages for the permit set.
Common Questions
Frequently asked.
- What information do I need to provide?
- Room dimensions or an existing floor plan, appliance and fixture specifications, cabinet layout preferences, and any jurisdiction requirements you already know about. We work from sketches, photos, or finished design documents.
- Are stair drawings included if my project has a new stair?
- Yes. Stair sections, handrail profiles, and guardrail details are included when a stair is in scope. We draw the stair to the current IBC or IRC requirements and add jurisdiction-specific notes.
- Do you handle ADA-compliant bathroom drawings?
- Yes. For commercial bathroom scopes or residential projects subject to accessible design requirements, we draw elevations to ADA standards and include applicable code notes and clearance dimensions.
Continue Exploring
Related services.
- Drawings
Architectural Drafting
Complete, permit-ready plan sets for residential and commercial projects.
- Documentation
As-Built Documentation
Accurate existing-conditions drawings for renovation, permitting, and real estate.
- Drawings
Contractor Bid Package
A complete, bid-ready drawing and specification package that eliminates ambiguity and reduces scope gaps in contractor bids.
Interior drawings ready for plan check.
Tell us the rooms, jurisdiction, and scope. We deliver complete interior elevation and detail packages in 5 to 7 business days.